APLICACIONES DE EQUIPOS DE ELECTROQUÍMICA

Se han seleccionado aplicaciones destacadas de equipos de electroquímica de marca Bio-Logic.

CELDAS FOTOVOLTÁICAS

“Application of the Capacitance-Voltage curve to photovoltaic cell characterizations”

C-V characterization at different frequencies.

 

"IMVS investigation on photovoltaic cell"

"Nyquist plot of IMVS."

 

CORROSIÓN Y RECUBRIMIENTOS

“Corrosion of reinforced concrete”

Scheme of realkalisation method.

 

"VASP : An innovative and exclusive technique for corrosion monitoring"

"Bode impedance diagram for fs frequency determination."

 

“Electrochemical Noise Measurements: II - ASTM assessment on a real electrochemical system”

Electrochemical noise resistance for AISI 1018 steel in 0.1 M citric acid obtained using a VSP-300.

 

"Corrosion current determination with mass transfer limitation"

"Steady-state log |I| vs. E curve for the BP dummy cell."

 

CELDAS Y BIOCELDAS DE COMBUSTIBLE

“Electrical characterization of a ceramic with MTZ-35 and HTSH-1100 test fixture ”

“Experimental setup.”

 

"Fuel Cell Testing. Part I: Overview and I/E characterizations"

"Synopsis tab."

 

“Cycling battery with reference electrode by using the PAT-cell test cell ”

Voltage and current profiles of the overall experiment. The blue line corresponds to the positive half-cell voltage, the red line to the negative half-cell voltage, and the green line to the full cell voltage.

 

"Supercapacitors investigations Part I: Charge/discharge cycling"

"Charge/discharge cycling."

 

ESPECTROSCOPIA DE IMPEDANCIA DE MATERIALES

"Electrical characterization of a ceramic with MTZ-35 and HTSH-1100 test fixture"

"Zoom on the high frequencies region."

 

SENSORES

"Calculation of the platinum’s active surface"

"10th cycle isolated from the curve with oxydo-reduction specificities for platinum."